HOŞ GELDİNİZ
Hızlı ve güvenli alışverişe giriş yapın!
HENÜZ ÜYE DEĞİL MİSİNİZ?
Kolayca üye olabilirsiniz.
H3C

H3C S6520X-54HC-EI SFP Datacenter Switch

Ürün Kodu
S6520X-54HC-EI
Marka
H3C
Garanti Süresi
24 Ay
Fiyat
16.900,00 USD + KDV
638.144,00 TL
Anlaşmalı Kargo
Kapıdan Teslim
Paylaş:
							

- H3C S6520X-54HC-EI L3 Ethernet SFP+ Switch

- 2 x H3C 250W AC Power Supply Module (Power Panel Side Exhaust Airflow)

- H3C 2 * Fan Module (Fan Panel Side Exhaust Airflow)

- H3C S6850-56HF Next Business Day Support Services (24Mo)


H3C S6520X-54HC–EI: 48 × 1/10G SFP+ ports, 2 × QSFP28 ports (100G, can be split into four 25GE ports), 2 × expansion slots, 2 × fan tray slots, and 2 × power module slots


Features and benefits

Open application architecture

In H3C open application architecture (OAA), the switch can accommodate high-performance OAP modules to offer dedicated services such as firewall, IPS, or load balancing in addition to conventional forwarding services. By installing OAP modules, the customers can use the switch as a multiservice device without having to buy separate service appliances, such as a firewall device.

High-density 10GE forwarding

The switch offers high-density 10GE forwarding and can expand 10GE ports flexibly. It provides 48/24*10/1GE autosensing SFP+ ports, six QSFP28 ports or two QSFP28 or QSFP+ ports onboard, and two expansion slots that support up to 11 kinds of modules range from GE to 10GE, 25GE, 40GE,100GE and Multigiga ports. Using a QSFP+ to SFP+ splitter cable, you can split a QSFP+ port into four line-rate 10GE SFP+ ports. Max 72*10GE supported on one single switch.


Embedded Access Controller

H3C S6520X-EI implements the WLAN function by installing an AC feature pack on the main control unit, thereby implementing both the wired function and the WLAN function on a single device. Embedded AC is a low-cost WLAN solution, save overall investment, improve forwarding capacity, realized a true unified wired and wireless solution in Campus. Max256 AP supported on one single switches.


H3C Intelligent Resilient Framework 2 (IRF 2) virtualizes multiple S6520X-EI switches into one virtual switch and provides the following benefits:

Scalability: IRF 2 allows you to add devices to the IRF 2 system easily. It provides a single point of management, enables switch plug-and-play, and supports software auto-update for software synchronization from the master to the new member devices. It brings business agility with lower total cost of ownership by allowing new switches to be added to the fabric without network topology change as business grows.

High availability: The H3C proprietary routing hot backup technology ensures redundancy and backup of all information on the control and data planes and non-stop Layer 3 data forwarding in an IRF 2 fabric.

It also eliminates single point of failure and ensures service continuity.

Redundancy and load balancing: The distributed link aggregation technology supports load sharing and mutual backup among multiple uplinks, which enhances the network redundancy and improves link resources usage.

Flexibility and resiliency: The switch use standard GE ports instead of specialized ports for IRF links

between IRF member devices. This allows customers to assign bandwidth as needed between uplink, downlink, and IRF system connections. In addition, an S6520X-HI IRF fabric can span a rack, multiple racks, or multiple campuses.

Wide range of advanced features

The switch offers a wide range of features, including:

Modular hardware and software design: The switch uses modular, hot swapping, and redundancy design for hardware, including power modules and fan trays. The switch also uses modular design for software, which enables feature installation and removal on an as-needed basis. Refined physical architecture and optimized software workflows greatly reduce the end-to-end packet processing delay.

Software-defined networking (SDN): An innovative network architecture that separates the control

plane from the forwarding plane, typically by using OpenFlow. SDN significantly simplifies network

management, reduces maintenance complexities and costs, enables flexible traffic management, and offers a good platform for network and application innovations.

Virtual eXtensible LAN (VXLAN): A MAC-in-UDP technology that provides Layer 2 connectivity between distant network sites across an IP network. VXLAN enables long-distance virtual machine and data mobility and is typically used in data centers and the access layer of campus networks for

multitenant services. The H3C implementation of VXLAN supports automatic VXLAN tunnel

establishment with EVPN.

Ethernet Virtual Private Network (EVPN): A Layer 2 VPN technology that provides both Layer 2 and

Layer 3 connectivity between distant network sites across an IP network. EVPN uses MP-BGP in the

control plane and VXLAN in the data plane. EVPN provides the following benefits: Configuration

automation; Separation of the control plane and the data plane; Integrated routing and bridging (IRB).

In-Service Software Upgrade (ISSU) and Operation, Administration, and Maintenance (OAM):

Ensure business continuity and improve Ethernet management and maintainability.

Comprehensive security control policies

The switch supports AAA authentications (including RADIUS authentication) and dynamic or static binding of user identifiers such as user account, IP address, MAC address, VLAN, and port number.

Using the switch in conjunction with H3C IMC, you can manage and monitor online users in real time and take prompt action on illegitimate behaviors.

The switch offers a large number of inbound and outbound ACLs and VLAN-based ACL assignment. This simplifies configurations and saves ACL resources.

MACsec

MACsec is an ideal hop-by-hop link-layer security protocol for Ethernet networks, which are typically insecure. It provides the following services:

Data encryption: Encrypts data over the Ethernet link to protect data against security issues such as eavesdropping.

Anti-replay: Prevents packets from being intercepted and modified en route to protect the network

against unauthorized access.

Tampering protection: prevents packet tampering to protect data integrity.

MACsec supports the following deployments:

Client-oriented: Protects data transmission over the link between the client and its access device.

Device-oriented mode: Protects data transmission over the link between two peering devices.


The switch can cooperate with H3C iNode client and core switches such as S10500X and S7500X to provide a complete MACsec solution.

High availability

In addition to node and link protection, the switch offers the following hardware high availability features:

1+1 power module redundancy and 1+1 fan tray redundancy.

Hot-swappable interface modules.

Automatic power and fan tray status monitoring and alarming mechanisms.

Automatic fan speed adjustment based on the change in temperature.

Self-protection mechanisms that protect power modules against overcurrent, overvoltage, and

overtemperature conditions.

Bu ürüne ilk yorumu siz yapın!
H3C S6520X-54HC-EI SFP Datacenter Switch H3C S6520X-54HC-EI SFP Datacenter Switch S6520X-54HC-EI
H3C S6520X-54HC-EI SFP Datacenter Switch

Tavsiye Et

*
*
*
IdeaSoft® | E-Ticaret paketleri ile hazırlanmıştır.